Are you looking for the best solution to remove the fats, oils and grease- FOG from the sewage system? If so, consider installing grease separator. Removing oils and greases from the wastewater is important for protecting the environment.

This must be done before discharging water into the sewage system to adhere with the government regulations and also to protect the blockage of the sewage system. There are two methods to remove FOG from the drain water and they are grease separator and grease trap.

What is grease trap?

A cutting-edge grease trap from a professional manufacturer is a basic form of equipment for separating grease and oils from water. It is shaped like a box and includes a baffle plate, solid compartment and separation area.

The baffle plate slows down the flow of the water and minimizes the turbulence. This allows solids to drop out into the compartments made for solids. The separation area allows for oil to float to the water surface.

Discharge water is drawn from the outlet that is beneath the surface and this prevents the fats, oils and grease from being carried into the sewage system. The resulting waste water is largely clean from oils and solids.

Grease trap solid compartments must be cleaned out on regular basis to prevent blockages. It is important to clean the solid compartment when reaches 25% of its capacity. Based on the capacity of the facility, some users set the time limit schedule for cleaning.

What is a grease separator?

Grease separators are the state-of-the-art and the most advanced forms of equipment for separating oil from water. They have internal structures that facilitate the binding of oil droplets together. The time of retention of water inside the separator is longer than the grease trap, allowing more time for the separation to occur.

This causes the easy removal of oil from water stream. Grease separators have higher capacity ratings than the grease traps epitomizing they can be used for higher water flow rates.

Difference between the grease separator and grease trap

1. Grease traps are normally used in applications where there is the potential of blocking. This includes commercial kitchens and restaurants where fatty materials can solidify in drain lines. The solid compartment of the grease traps ensures the solid waste is removed from the drain thus preventing the blockages. Grease trap can be used in the industrial applications where there potential for oil and other hydro carbons to be carried into the waste water stream. Applications include car washes, mining sites, workshops, industrial sites, service stations and manufacturing sites.
2. Grease traps have the main function of removing fatty solids from waste water. They are mostly used in the commercial kitchens or similar applications. Oil separators have the main function of removing liquid oils from waste water. They are used commonly in manufacturing and industrial applications.

Wrap up